Medidor de flujo Dynasonics UFX
Medidor de flujo Dynasonics UFX
Código de Producto: UFX
Puntos de Premio: 0
Existencia: Pre-Order
Precio: $2,099.00 USD
Cantidad:  Comprar
El UFX Doppler Flow Meter Serie – Es un medidor de caudal digital no invasivo que cuenta con una tecnología de medición ultrasónica avanzada, proporcionando evaluaciones precisas y fiables de velocidad de flujo en sistemas de tuberías cerradas. El medidor de flujo Series UFX es un sistema de medición de flujo rentable para tuberías cerradas de ¼ " (Con accesorio de transductor para tubo pequeño ) y de diámetros mayores . El transductor de mano es fácil de usar y proporciona  lecturas de flujo precisas en aplicaciones tales como sistemas de drenaje , petróleo crudo , lodos y lodos residuales entre otras .


Product Includes Standard (1" or greater pipe diameter) transducer, acoustic couplant, batteries, and carrying case.

Electronics Specifications

Flow Range:  0.30 to 30 FPS (0.10 to 9 MPS)
Display:  Single line, four-digit LCD readout of velocity  0.9”  (18 mm) high digits, signal strength, measuring units and low battery indication  •  Accuracy:  ±2% f.s.
Temperature:  -28 to 140°F (-20 to 60°C)
Enclosure Rating:  NEMA 12X ABS plastic  
Dimensions:  7.76 H x 4 W x 1.5”  •  Weight:  1.5 pounds
Agency Approval:  FM and CE mark (pending)
Supply Voltage:  Battery powered, non-rechargeable alkaline, four ‘AA’ batteries provide over 30 hours of continuous operation

Transducer Specifications

Transducer Material:  Plated body, ULTEM 1000 sensor material  
Cable:  6.6 feet (2 meters) cable and connector
Temperature:  -40 to 180°F (-40 to 87°C)
Mounting Method:  Clamp-on style with DOW 111 coupling compound  
Humidity:  0 to 95% non-condensing


Successful application of Doppler ultrasonic flow meters relies on three physical constraints:

  1. The liquid flowing within the pipe must contain 100 ppm of useful sonic suspended reflectors - dissolved solids do not generate reflections and are not relevant. 
    •  The speed of sound of the reflector must vary by greater than 10% from that of the liquid carrier.
    •  Particles must be large enough to cause longitudinal reflection. Particles greater than 35 micron size meet this criteria.
    •  In typical applications, there is often a distribution of particle sizes. If the volume of particles greater than 100 microns is 25% of the overall particle volume, then the reflectors are adequate for a Doppler ultrasonic flow meter.
    •  The reflecting material must travel at the same velocity as the fluid for good accuracy. Upward flowing pipes running at low velocities may not carry heavier reflectors at the same velocity as the carrying liquid - leading to inaccurate flow measurements.
  2. A significant portion of the ultrasound energy generated by the transducer must reach the sonic reflectors.  In the case of a clamp-on transducer, the ultrasonic transducer must be acoustically coupled to the outside of a pipe (using grease or RTV couplant) and the pipe must permit ultrasound to pass without significant attenuation.  Most pipes constructed of solid, homogenous materials meet this qualification.  Pipes that cause application difficulty include concrete pressure pipes, wooden stave pipes, Teflon-lined pipes and fiberglass reinforced pipes.  Pipes that do not readily pass ultrasound are candidates for the DP7 insertion probe transducer.
  3. The pipe must be completely filled with liquid when measurements are made.  The DFX microprocessor assumes that the pipe is completely full when it calculates flow rate.  Use on partially-filled pipes may result in inaccurate readings.
size 7.76 H x 4 W x 1.5”
Shipping Weight 4.0000
Power Supply four ‘AA’ batteries
Manufacturer Dynasonics
Manufacturer Warranty 1 Year
Mitchell Catalog Number 7LDUFX1,8LDUFX1,9LDUFX1,WBDUFX1

Escribir Opinión

Tu Nombre:

Tu Opinión: Nota: No se permite HTML!

Clasificación: Malo            Bueno

Introducir el Código: